Parametric uncertainties should always be considered when setting design criteria in order to ensure safe and cost effective design of engineered structures. This paper presents the results of the reliability assessment of a fully laterally restrained steel floor I-beam to Eurocode 3 design rules. The failure modes considered are bending, shear and deflection. These were solved to obtain reliability indices using first order reliability method coded in MATLAB environment. Parametric sensitivity analyses were carried out at varying values of the design parameters to show their relative contributions to the safety of the beam. It was seen that reliability indices generally decreased with an increase in load ratio, imposed load, beam span in bending, shear stress and deflection respectively. In addition, increasing the beam span beyond 10 m, load ratio above 1.4 and imposed load beyond 30 kN/m made the beam fail as these parameters gave negative reliability indices. For failure in deflection, reliability index rose with an increase in the radius of gyration and overall depth of the beam section accordingly. Furthermore, the reliability index surged as the thickness of the web increased when taking into account, shear failure. The results of the analysis showed that the steel beam is very safe in shear and at some load ratios and imposed loads for failure in bending and deflection respectively. The average values of reliability indices obtained for load ratios ranging from 1.0 to 1.4 fell from 3.017 to 3.457 for all failure mode studied. These values are within the recommended reliability indices by the Joint Committee on Structural Safety for structure with moderate failure consequences and beams in flexure.
Loading....